Port security with sticky MAC and violation modes, DHCP snooping, Dynamic ARP Inspection, IP Source Guard, 802.1X port-based authentication, and management plane hardening on Cisco IOS — CCNA-level coverage with practical configuration examples.
Ios
-
CCNA: Network Security Fundamentals -
Cisco IOS Command Walkthroughs A practical annotated reference of essential Cisco IOS commands organized by task — initial setup, interfaces, routing, switching, NAT, ACLs, DHCP, and diagnostics — with real output explained field by field.
-
CCNA: ACLs — Standard, Extended, and Named A complete guide to Cisco IOS Access Control Lists for CCNA: standard vs extended, numbered vs named, wildcard masks, implicit deny, placement rules, editing ACLs, and every show and debug command you need for verification and troubleshooting.
-
CCNA: DHCP, DNS, and NTP on IOS Configuring DHCP server, DHCP relay, DNS resolution, and NTP time synchronisation on Cisco IOS — complete configuration, verification commands, and troubleshooting for all three protocols.
-
CCNA: EIGRP Fundamentals EIGRP from first principles: DUAL algorithm, successor and feasible successor selection, the feasibility condition, composite metric calculation, unequal-cost load balancing, neighbor tables, topology tables, and complete Cisco IOS configuration and verification.
-
CCNA: IPv4 Routing Fundamentals How routers make forwarding decisions, the routing table in depth, administrative distance, static routes with next-hop vs exit-interface, default routes, recursive lookups, and connected/local routes — with full Cisco IOS CLI examples.
-
CCNA: NAT and PAT — Network Address Translation in Depth Static NAT, dynamic NAT, and PAT explained from first principles — inside/outside local/global address terminology, full Cisco IOS configuration, NAT translation table interpretation, debug ip nat output, and troubleshooting every common failure mode.
-
CCNA: OSPF Single-Area Configuration OSPF from first principles through production configuration: link-state database, DR/BDR election, the seven neighbor states, Hello/Dead timers, LSA types, passive interfaces, cost tuning, and complete Cisco IOS CLI examples.
-
CCNA: WAN Technologies and PPP WAN link types, PPP encapsulation with PAP and CHAP authentication, PPPoE client configuration on Cisco IOS, and SD-WAN as a modern WAN replacement — CCNA-level coverage with practical IOS examples.